Powerwalker EMD for SNMP Manager Uživatelský manuál stáhnout pdf (Strana 2)

5. Monitoring Software Operation

Software Installation

After unit is connected well, please follow below steps to install monitoring software from the

internet.

1. Go to the website http://www.power-software-download.com

2. Click ViewPower Pro software icon and then choose your required OS to download the

software.

3. Follow the on-screen instructions to install the software.

4. When your computer restarts, the monitoring software will appear as an orange plug icon

located in the system tray, near the clock.

Operation

Step 1: Double click “ViewPower Pro” icon to

launch the software.

Step 2: SNMP manager will be automatically

activated. Select “SNMP manager” by

clicking right button of the mouse.

Step 3: Enter specific IP address to search all

SNMP devices in LAN. The SNMP manager

will automatically collect the IP address from

sever by default via a DHCP server.

Step 4: After SNMP manager is successfully

detected by SNMP manager, select “Open

Monitor” by clicking right button of the

mouse.

Step 5: When launching ViewPower Pro software, click “Environmental information” icon to view

status.

6. Trouble Shooting

Problem

Possible Cause

Solutions

It displays 0 in the

environmental

information section of

software.

SNMP card is not connected

well.

Make sure SNMP card is firmly

connected in the UPS.

Network cable or adapter is not

connected well.

Make sure network cable and adapter

are connected well .

LED is not lighting or

LED is flashing.

Input power is not stable.

Check if adapter is connected firmly

to grid. If the problem persists,

please contact local dealer.

Temperature or humidity

accuracy is out of range.

Temperature or humidity

sensor is broken.

Please contact local dealer directly.

7. Specification of Environmental Monitoring Device

Model

EMD

Nominal DC Input

12VDC

Temperature measurement range

0 ~ 100°C

Temperature measurement accuracy

±1.5°C

Humidity measurement range

10% ~ 90% RH

Humidity measurement accuracy

±3%

Communication

RS232 with ASCII protocol

Acceptable cable length

15 m

Dimension (DxWxH) mm

110 x 71.6 x 48.3

Net weight

194 g

8. Specification of Power Adapter

If supplied power adapter is not suitable for local power requirement, you may buy a new one

according to the following specifications.

Output Voltage (@ 0A)

Minimum Output Voltage

11.4 VDC

Nominal Output Voltage

12 VDC

Maximum Output Voltage

12.6 VDC

Output Voltage (@ 1A)

Minimum Output Voltage

11.4 VDC

Nominal Output Voltage

12 VDC

Maximum Output Voltage

12.6 VDC

DC Connector Size

5.5 mm x 2.1 mm

+12V

GND

1 2

Komentáře k této Příručce

Žádné komentáře

Powerwalker EMD for SNMP Manager Uživatelský manuál Strana 2

Komentáře k této Příručce

Související produkty a manuály pro Hardware Powerwalker EMD for SNMP Manager