Powerwalker ATS Uživatelský manuál stáhnout pdf (Strana 6)

6. Operation

Power On/Off

Put the input power switch in “ON” position. The output will then be supplied by the source set as

selected.

Setting priority of power source

It is possible to set the power source preference to supply the output by pushing the button of

“source preference selector”. The default power source is “Source A”.

Function

Description

Default

Possible configuration

Source perference

selector

Selection of input that normally

supplies the load

Source A

 Source A

 Source B

7. Communication Port

The ATS is supplied with the following communication ports:

 Serial port is available with RS232 com. port and USB com. port on the front panel.

NOTE: the use of one port automatically excludes the other.

 Contacts port on the rear panel.

Serial Ports: RS-232 & USB connectors

RS-232 connector USB connector

PIN #

NAME

TYPE

SIGNAL

PIN #

SIGNAL

VBUS

OUT

Serial line TX

D-

Serial line RX

D+

GND

POWER

+12V

POWER

NOTE: The utilization of the communication port is optional and it is not necessary for the correct

functioning of the ATS.

1 2 3 4 5 6 7 8 9 10

Komentáře k této Příručce

Žádné komentáře

Powerwalker ATS Uživatelský manuál Strana 6

Komentáře k této Příručce

Související produkty a manuály pro Hardware Powerwalker ATS