Powerwalker ATS Uživatelský manuál

EN Automatic Transfer Switch (ATS) Quick Start Guide

EN 10. Appendix: Input Voltage and Frequency Thresholds FUNCTION DESCRIPTION DEFAULT SETTING Acceptable input voltage range for Source A Source A

EN 1. Introduction This ATS product is designed with two independent power inlets to supply power to the load from a primary power source. Should pr

EN 3. Important Safety Warnings Before using the unit, please read all instructions and cautionary markings on the unit, this manual and the batteri

EN Indication type LED description LED status Condition Alarm Priority setting LEDs Source A () ON Source A is priority OFF Source B () OFF Source

EN 5. Installation NOTE: Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. Mounting the Unit The u

EN 6. Operation Power On/Off Put the input power switch in “ON” position. The output will then be supplied by the source set as selected. Setting p

EN Contact Ports The contacts port is formed using six (6) pins numbered from left to right (see fig. 1), which can be connected to an external monit

EN 8. Trouble Shooting Use the table below to solve minor problems. Problem Possible Cause Solution The ATS with the mains voltage present, does don

EN 9. Specifications MODEL ATS INPUT Input Voltage 220/230/240 VAC Acceptable Input Voltage Range 180 - 258 VAC Input Frequency 50 Hz/60 Hz Maximu